Synthesis of Some Novel 1,3,4‐Oxadiazol‐2‐yl‐4(3H)‐quinazolinones

N‐1‐Aroyl‐2‐{[(3‐methyl‐4(3H)‐quinazolinone‐2‐yl)methyl]anilino} ethano hydrazides (4), prepared from 2‐phenylaminomethyl‐3‐methyl‐4(3H)‐quinazolinone (1), underwent PPA‐catalyzed cyclization the to title compounds 5 in 51–67% yield.     

On the limitation of the van der Waals-Platteeuw-based thermodynamic models for hydrates with multiple occupancy of cavities

Thermodynamic models based on the van der Waals–Platteeuw statistical theory (Adv. Chem. Phys. 2, 1 (1959)) can be very accurate in describing hydrate equilibrium conditions, even for some occasions when multiple cavity occupancy occurs. These are cases outside the range of assumptions used for the development of the original statistical theory. However, during multiple cavity occupancy such models can perform poorly when calculating the cavity occupancies. This paper reports novel Grand Canonical Monte Carlo molecular simulations for the case of pure structure II N₂ hydrate and compares the calculated cavity occupancies with experimental data and observe reasonable agreement. Also examined are the van der Waals–Platteeuw-based modifications that retained the single-occupancy assumption of the original theory and how they perform when predicting cavity occupancies and hydrate equilibrium pressures.     

Synthesis, crystal structure, and structural conversion of Ni molybdate hydrate NiMoO4·nH2O

The synthesis and crystal structure of NiMoO₄·nH₂O were investigated. The hydrate crystallized in the triclinic system with space group P−1, Z=4 with unit cell parameters of a=6.7791(2) Å, b=6.8900(2) Å, c=9.2486(2) Å, α=76.681(2)°, β=83.960(2)°, γ=74.218(2)°. Its ideal chemical composition was NiMoO₄·3/4H₂O rather than NiMoO₄·1H₂O. Under hydrothermal conditions the hydrate turned directly into α-NiMoO₄ above 483 K, giving nanorods thinner than the crystallites of the mother hydrate. On the other hand, it turned into Anderson type of polyoxomolybdate via a solid-solution process in a molybdate solution at room temperature.     

烷基苯磺酸盐表面活性剂对水合硅酸钙形貌和结构的影响

利用十二烷基苯磺酸钠(SDBS)为模板剂, 研究了SDBS的浓度、 Ca ²⁺和Si {\mathrm{O}}_3^{2-} 离子的浓度、 是否搅拌和反应时间等条件对水合硅酸钙(CSH)形貌特征和分散性能的影响, 并提出了不同CSH球壳形貌特征的形成机理. 结果显示, 溶液中Na₂SiO₃·9H₂O浓度增大、 SDBS浓度增大及反应时间延长均会使CSH的结晶度变好, 聚合度增大, Q ²结构的相对含量增加, 其中Na₂SiO₃·9H₂O和SDBS浓度是主要控制因素. SDBS在溶液中形成的球形胶束具有极强的模板作用, 能有效改变CSH的结晶生长方式; 通过调节SDBS浓度和钙硅比例, 并适当延长CSH的生长时间, 能够获得球壳完整、 分散性好且稳定性强的CSH.     

苯并噻唑类荧光探针的合成及对N2H4·H2O和HSO-3的检测性能

以苯并噻唑为荧光团, 氰基乙酸乙酯为识别基团, 设计合成了对水合肼和亚硫酸氢盐具有双重检测能力的荧光探针3-(2-羟基-苯并噻唑)-2-氰基-丙烯酸乙酯(HBT-CN). 在二甲基亚砜/磷酸盐(体积比为1：4)的缓冲液中, 探针对水合肼和亚硫酸氢盐具有良好的选择性, 且荧光强度分别增强了5.6倍(500 nm)和7.5倍(458 nm). 结果表明, 在检测过程中, HTB-CN与水合肼发生了还原-缩合反应, 生成了醛腙, 在波长500 nm处发出黄绿色的荧光信号; HBT-CN与亚硫酸氢盐发生了亲核加成反应, 在波长458 nm处发出蓝色的荧光信号, 从而实现了对水合肼和亚硫酸氢盐的差异性定性与定量检测.     

二硫化钴多孔风叶结构助力肼辅助高效电解产氢

以泡沫镍(NF)为基底,采用一步水热法制备了主晶相为CoS₂、夹杂少量NiO相、具有三维多孔风叶结构的CoS₂/NF电极材料。当溶液中钴硫物质的量之比为1∶5时,在140℃下保温18 h,获得了由10 nm厚度的纳米片构成的三维风叶结构的晶态CoS₂/NF电催化剂。CoS₂/NF在肼氧化及析氢反应中均表现出优异的催化性能,在水合肼碱性介质中,获得-10 mA·cm^-2的析氢电流密度时,需要的过电势仅为83 mV,获得50 mA·cm^-2的氧化电流密度时,需要的肼氧化电位仅为51 mV(vs RHE);在水合肼辅助电解水双功能电解槽中,获得100 mA·cm^-2的电流密度时,需要的分解槽压仅为0.550 V,远低于其在同条件下全水分解的2.075 V,大幅减小了电能消耗,极大地提高了电解水产氢效率。无论在三电极体系还是双电极体系,CoS₂/NF均表现出优异的长效稳定性及耐用性。分析认为,电极表面多孔风叶结构的形成,...     

碳纳米管表面修饰程度对其载Pd纳米粒子的电催化氧化水合肼性能的影响

比较了未氧化处理与经浓硝酸或混酸(浓硫酸与浓硝酸体积比为1∶1)处理后的不同多壁碳纳米管(MWNTs)为载体的Pd催化剂(Pd/MWNTs)对水合肼氧化的电催化性能. 光谱表征和电化学测试结果表明, MWNTs表面不修饰或修饰程度过大都不利于金属Pd纳米粒子的沉积. 浓硝酸处理使MWNTs表面修饰的含氧基团适中, 能够促进负载的Pd纳米粒子均一分布, 因此提高Pd/MWNTs催化剂对水合肼的电催化性能. 相反, 混酸处理使MWNTs表面产生的含氧基团过多, 导致金属Pd纳米粒子部分聚集, 从而降低Pd/MWNTs催化剂对水合肼的电催化性能.     

水合物反应液中水活度系数模型研究进展

水合物反应液中水活度系数的计算对水合物相平衡特性的研究及水合物技术的应用具有重要意义。 通过调研大量的国内外资料,概括了Margules、Wilson、NRTL、UNIQUAC及UNIFAC活度系数方程及其关联式等模型及其应用,结果表明,Margules模型常用于二元体系活度系数的计算,但对高温高压体系条件下的溶液适用性较差;Wilson模型参数回归误差稍大且不适于溶质与离子不能完全互溶体系;UNIQUAC模型在含水或咪唑类离子反应液体系中误差较大;多元离子体系相平衡的研究中常选择NRTL模型;UNIFAC模型拟合效果较好,可实现较高浓度体系活度系数的精确计算,应用较广泛。 水活度关联方程参数拟合效果好,且准确度高,但在高温高压水合物反应液体系中的计算仍是一个技术难点,是今后的研究方向。     

Thermal stability and photoluminescence property of hexagonal MoO3·0.55H2O microrods

The metastable phase of well-faceted, hexagonal, prism-like molybdenum oxide hydrate (MoO₃·0.55H₂O) was successfully synthesized by evaporating molybdic acid solution prepared through cation membrane electrolysis of Na₂MoO₄·2H₂O aqueous solution. The obtained crystals were characterized by X-ray diffraction (XRD), thermogravimetric (TG), scanning electronic microscopy (SEM) and photoluminescence (PL) spectrophotometry. The as-prepared MoO₃·0.55H₂O rods were of 2–4 μm in width and 5–12 μm in length. The MoO₃·0.55H₂O microrods displayed photoluminescence properties at room temperature and were transformed into stable orthorhombic α-MoO₃ after air annealing at 380 °C. Moreover, the influence of temperature factor on the phase transformation process, morphology and photoluminescence properties of MoO₃·0.55H₂O was investigated in detail.     

一种新的海洋浅层水合物开采法——机械-热联合法

天然气水合物是国家的战略能源之一.天然气水合物分解相变使其开采难度高于常规化石能源.国际天然气水合物试验性开采表明通过降压、注热等方法难以满足商业化开采的需求,尤其在水合物位于浅层、软土情况下,持续稳定且高效率的热量供给是其瓶颈.天然气水合物机械-热联合开采是一种新概念模式,即通过粉碎水合物沉积物通过管道输运并在内部分解,这样既增加了传热的表面积,又利用海水热量和对流传热提高了能量供给效率.分析表明:利用该方法开采时水温过高会导致水合物分解过快而产生不稳定流,温度过低又导致水合物二次生成或结冰;水流流速既要能使被粉碎的水合物沉积物颗粒悬浮和流动,又不能导致流动失稳.为了实现高效安全的机械-热水合物开采,经过初步分析提出原位水合物地层粉碎的颗粒直径设定在0.1~1.0 cm之间,控制水流速度为0.22~0.67m/s,温差保证在5K以上,混合物中水的体积分数大于0.85.